| The FingerTec R2 device, is a time attendance and access control device series that is available with its own exit reader, FingerTec R2i, for a complete in/out solution. With the latest R2 firmware update, the R2 constantly checks the status of the R2i to check if it is working as it should. If the R2 detects that the R2i exit reader has stopped responding with it (which may be due to a hardware failure), the R2 will activate a buzzer for 60 seconds to alert an administrator. The administrator will then restart the system by resetting the power supply, or just leave the R2 to automatically restart by itself.
However, if the R2 is not being used with the R2i exit reader, you will notice that the R2 will often sound the buzzer and proceed to restart by itself. To prevent this from occurring, you’ll have to change a setting in the Advance Option menu by following the steps below:
Press Menu > Select Option > Select System Option > Select Advance Option > Select With R2i/Two sensor > Change setting to “N” > Save Settings > Restart the terminal |
|
